© OpenStreetMap contributors
- Add External Layer
- Upload Shapefile
- Close
Use the checkbox () to show or hide a layer.
Use the radio buttons () to select a layer to use with the identify function.
- Layers
- Opacity
Available layers
Search for marine data across UK organisations
- How-To
- About
- Contact MEDIN
- Share
Metadata: Oceanographic data from the Propagation Channel Simulator (PROSIM) Clyde Sea experiment
Abstract:
The data set comprises measurements of water temperature, salinity, current velocities and sound velocity, and sediment characteristics. The data were collected in the Clyde Sea in July and August 1997. The bulk of the measurements were made at the acoustic transmission point Tx1 (55 31.6N, 4 49.7W), and at receiving points SW of Tx1 up to 20 km away. In addition a SW-NE section (55 13.5N, 5 9.4W to 55 35.0N, 4 46.3W) was sampled at the beginning and end of the experiment, and a W-E section (5 3.0W to 4 52.7W at 55 31.6N) was run three times during the experiment. The data were collected by the research vessels Prince Madog and Calanus. Throughout the experiment the Prince Madog was used to deploy the acoustic transmission equipment, and as the main oceanographic vessel. The Calanus acted as the receiving ship, and also collected conductivity-temperature-depth (CTD) profiles. Overall, 199 CTD casts, 71 hours of temperature time series data, 150 hours of acoustic Doppler current profiler (ADCP) data, 70 hours of RoxAnn (sidescan sonar), position and water depth data, and three sediment sound speed profiles were collected. Two CTDs were used onboard the Prince Madog: a Seabird SBE-19 and a Neil Brown Mk. III. A Neil Brown SmartCTD was used on the Calanus. Several casts were made onboard the Madog with both CTDs attached to the same frame for intercalibration purposes. At the bottom of each cast with the Neil Brown Mk. III CTD two SIS digital reversing thermometers were triggered and a seawater sample collected, which was later analysed in the laboratory for salinity. Temperature and salinity data from the Madog CTDs were calibrated using these values. No seawater samples were collected by the Calanus. Data from all CTDs were despiked and spurious density inversions were removed. The majority of the CTD casts were repeat casts at either the acoustic transmission or reception point, the object being to monitor the high frequency variability of the water column, and allow model predictions of the acoustic signal characteristics to be tested against observed signal variations. Whilst the Prince Madog was on station at Tx1 four internally recording temperature sensors were deployed at fixed depths. During some overnight runs a single temperature/depth sensor was also deployed; during transmission experiments this sensor was attached to the acoustic source. The ADCP onboard the Madog was used to record vertical current profiles for most of the experiment. A RoxAnn system onboard the Prince Madog was used during part of the experiment to log ship position, water depth, and the bottom roughness and hardness indices E1 and E2. Three bottom sediment cores were collected on 5/8/97 with a hydroplastic (gravity) corer. Two metre core barrels with an internal diameter of about 8cm were used. The cores each contained between 1m and 1.5m of sediment, and were analysed for sound speed at the University of Wales, Bangor after the cruise. The cores were taken at Tx1 (55.527N, 4.832W), 10 km (55.441N, 4.843W), and 20 km (55.371N, 4.880W) along the primary acoustic track. The precision of the sound speed measurements is +/- 10 m/s. The PROSIM Clyde Sea experiment was primarily an acoustic transmission experiment designed to study shallow water acoustic propagation. The oceanographic data were collected to provide information on the mean and time-varying characteristics of the water column for use in acoustic modelling. PROSIM was undertaken by the Unit for Coastal and Estuarine Studies, a self-funded research unit attached to the School of Ocean Sciences, University of Wales, Bangor. The unit specialises in physical oceanography and ocean modelling. The data are stored at the British Oceanographic Data Centre (BODC).
Data holder:
British Oceanographic Data Centre
Click on the red button for resource contact details:
- Click on the red button for resource contact details
Use constraints:
Data are freely available to all following agreement to the terms and conditions of a Data Licence
Other details | ||
Internal code | Internally assigned metadata identifier | 1619 |
Title | The title is used to provide a brief and precise description of the dataset such as 'Date', 'Originating organisation/programme', 'Location' and 'Type of survey'. All acronyms and abbreviations should be reproduced in full. | Oceanographic data from the Propagation Channel Simulator (PROSIM) Clyde Sea experiment |
Alternative title | The purpose of alternative title is to record any additional names by which the dataset may be known. | British Oceanographic Data Centre record 1048PROSIM |
File Identifier | The File Identifier is a code, preferably a GUID, that is globally unique and remains with the same metadata record even if the record is edited or transferred between portals or tools. | 2395dbfb4d9d599690f98ca3931e9d19 |
Resource Identifier | This is the code assigned by the data owner. | EDMED4279 |
Resource type | The resource type will likely be a dataset but could also be a series (collection of datasets with a common specification) or a service. | dataset |
Start date | This describes the date the resource starts. This may only be the year if month and day are not known | 1997 |
End date | This describes the date the resource ends. This may only be the year if month and day are not known | 1997 |
Spatial resolution | This describes the spatial resolution of the dataset or the spatial limitations of the service. | inapplicable |
Frequency of updates | This describes the frequency with which the resource is modified or updated i.e. a monitoring programme that samples once per year has a frequency that is described as 'annually'. | asNeeded |
Abstract | The abstract provides a clear and brief statement of the content of the resource. | The data set comprises measurements of water temperature, salinity, current velocities and sound velocity, and sediment characteristics. The data were collected in the Clyde Sea in July and August 1997. The bulk of the measurements were made at the acoustic transmission point Tx1 (55 31.6N, 4 49.7W), and at receiving points SW of Tx1 up to 20 km away. In addition a SW-NE section (55 13.5N, 5 9.4W to 55 35.0N, 4 46.3W) was sampled at the beginning and end of the experiment, and a W-E section (5 3.0W to 4 52.7W at 55 31.6N) was run three times during the experiment. The data were collected by the research vessels Prince Madog and Calanus. Throughout the experiment the Prince Madog was used to deploy the acoustic transmission equipment, and as the main oceanographic vessel. The Calanus acted as the receiving ship, and also collected conductivity-temperature-depth (CTD) profiles. Overall, 199 CTD casts, 71 hours of temperature time series data, 150 hours of acoustic Doppler current profiler (ADCP) data, 70 hours of RoxAnn (sidescan sonar), position and water depth data, and three sediment sound speed profiles were collected. Two CTDs were used onboard the Prince Madog: a Seabird SBE-19 and a Neil Brown Mk. III. A Neil Brown SmartCTD was used on the Calanus. Several casts were made onboard the Madog with both CTDs attached to the same frame for intercalibration purposes. At the bottom of each cast with the Neil Brown Mk. III CTD two SIS digital reversing thermometers were triggered and a seawater sample collected, which was later analysed in the laboratory for salinity. Temperature and salinity data from the Madog CTDs were calibrated using these values. No seawater samples were collected by the Calanus. Data from all CTDs were despiked and spurious density inversions were removed. The majority of the CTD casts were repeat casts at either the acoustic transmission or reception point, the object being to monitor the high frequency variability of the water column, and allow model predictions of the acoustic signal characteristics to be tested against observed signal variations. Whilst the Prince Madog was on station at Tx1 four internally recording temperature sensors were deployed at fixed depths. During some overnight runs a single temperature/depth sensor was also deployed; during transmission experiments this sensor was attached to the acoustic source. The ADCP onboard the Madog was used to record vertical current profiles for most of the experiment. A RoxAnn system onboard the Prince Madog was used during part of the experiment to log ship position, water depth, and the bottom roughness and hardness indices E1 and E2. Three bottom sediment cores were collected on 5/8/97 with a hydroplastic (gravity) corer. Two metre core barrels with an internal diameter of about 8cm were used. The cores each contained between 1m and 1.5m of sediment, and were analysed for sound speed at the University of Wales, Bangor after the cruise. The cores were taken at Tx1 (55.527N, 4.832W), 10 km (55.441N, 4.843W), and 20 km (55.371N, 4.880W) along the primary acoustic track. The precision of the sound speed measurements is +/- 10 m/s. The PROSIM Clyde Sea experiment was primarily an acoustic transmission experiment designed to study shallow water acoustic propagation. The oceanographic data were collected to provide information on the mean and time-varying characteristics of the water column for use in acoustic modelling. PROSIM was undertaken by the Unit for Coastal and Estuarine Studies, a self-funded research unit attached to the School of Ocean Sciences, University of Wales, Bangor. The unit specialises in physical oceanography and ocean modelling. The data are stored at the British Oceanographic Data Centre (BODC). |
Lineage | Lineage includes the background information, history of the sources of data, data quality statements and methods. | Instrument(s) used to collect data: current profilers; sidescan sonars; unconsolidated sediment corers; CTD; water temperature sensor. |
Related keywords | ||
Keyword | General subject area(s) associated with the resource, uses multiple controlled vocabularies | Sediment acoustics |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Sound velocity and travel time in the water column | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Vertical velocity of the water column (currents) | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Salinity of the water column | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Temperature of the water column | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Horizontal velocity of the water column (currents) | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | unknown | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Natural Environment Research Council Designated Data Centres | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Marine Environmental Data and Information Network | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Geology | |
General subject area(s) associated with the resource, uses multiple controlled vocabularies | Oceanographic geographical features | |
Geographical coverage | ||
North | The northern-most limit of the data resource in decimal degrees | 56 |
East | The eastern-most limit of the data resource in decimal degrees | -4 |
South | The southern-most limit of the data resource in decimal degrees | 55 |
West | The western-most limit of the data resource in decimal degrees | -6 |
Responsible organisations | ||
Role | The point of contact is person or organisation with responsibility for the creation and maintenance of the metadata for the resource. | pointOfContact |
Organisation name | British Oceanographic Data Centre | |
Individual name | Polly HadÅžiabdic | |
Position name | Head of the BODC Requests Team | |
Delivery point | Joseph Proudman Building, 6 Brownlow Street | |
Postal code | L3 5DA | |
City | Liverpool | |
Administrative area | Merseyside | |
Country | United Kingdom | |
URL | http://www.bodc.ac.uk/ | |
Role | The distributor is the person or organisation that distributes the resource. | distributor |
Organisation name | British Oceanographic Data Centre | |
Position name | Director | |
Delivery point | Joseph Proudman Building, 6 Brownlow Street | |
Postal code | L3 5DA | |
City | Liverpool | |
Administrative area | Merseyside | |
Country | United Kingdom | |
URL | http://www.bodc.ac.uk/ | |
Role | The originator is the person or organisation who created, collected or produced the resource. | originator |
Organisation name | University of Wales, School of Ocean Sciences | |
Individual name | Unknown | |
Position name | Unknown | |
Delivery point | School of Ocean Sciences,, University of Wales Bangor,, Menai Bridge,, Anglesey, | |
Postal code | LL59 5AB | |
City | Menai Bridge | |
Administrative area | Anglesey | |
Country | United Kingdom | |
URL | http://www.sos.bangor.ac.uk/ | |
Role | The custodian is the person or organisation that accepts responsibility for the resource and ensures appropriate care and maintenance. If a dataset has been lodged with a Data Archive Centre for maintenance then this organisation is be entered here. | custodian |
Organisation name | British Oceanographic Data Centre | |
Position name | Director | |
Delivery point | Joseph Proudman Building, 6 Brownlow Street | |
Postal code | L3 5DA | |
City | Liverpool | |
Administrative area | Merseyside | |
Country | United Kingdom | |
URL | http://www.bodc.ac.uk/ | |
Dataset constraints | ||
20 Limitations on Public Access - Access constraints | otherRestrictions | |
20 Limitations on Public Access - Other constraints | This states any limitations on access to the data and uses free text. | Data are freely available to all following agreement to the terms and conditions of a Data Licence |
21 Conditions for Access and Use - Use limitation | This states any constraints on use of the data. Multiple conditions can be recorded for different parts of the data resource. If no conditions apply, then `No condtions apply` is recorded. This uses free text. | Usage restrictions are specified in the terms of the licence |
Version info | ||
Date of publication | The publication date of the resource or if previously unpublished the date that the resource was made publicly available via the MEDIN network. | 2017-10-03 |
Date of last revision | The most recent date that the resource was revised. | 2011-01-26 |
Date of creation | The date that the resource was created. | 2010-10-01 |
Harvest date | The date which this record has been (re)harvested from the provider. | 2024-04-21 |
Metadata date | The date when the content of this metadata record was last updated. | 2018-02-06 |
Metadata standard name | The name of the metadata standard used to create this metadata | MEDIN Discovery Metadata Standard |
Metadata standard version | The version of the MEDIN Discovery Metadata Standard used to create the metadata record | Version 2.3.8 |